Filter
Top Products
23
24
OFF : Sensitivity enhance function not used; factory setting.
AUTO : As the scene darkens, the sensitivity is automatically
enhanced by the selected multiple. Best mode for
day/night continuous surveillance.
MANU : Mode for fixed sensitivity boost. When AGC is ON,
fixed at maximum gain.
The setting state of SENS UP and SHUTTER SPEED
1) When SENS UP setting is Manual, the shutter speed setting
is ineffective (off).
2) At SENS UP Auto, the shutter speed setting is as follows.
Shutter speed is 1/100 or effective during AES.
Shutter speed is 1/100 and ineffective (off) in modes other
AES.
The present camera includes a sensitivity enhancement function
that increases the CCD exposure time and interpolates the image
with an image stored in memory to effectively boost the sensitivity.
1) Press the SET button for longer than 2 seconds to display
the “MAIN MENU”.
2) Use the UP and DOWN buttons to shift the cursor to
“SENS UP” ; the setting flashes.
3) Press the SET button to select the setting sequentially in the
following order.
SET button: OFF AUTO x2 AUTO x4 AUTO x6
AUTO x8 AUTO x10 AUTO x12 AUTO x16
AUTO x32 AUTO x64 OFF MANU x2 MANU x4
MANU x6 MAN x8 MANU x10 MANU x12
MANU x16 MANU x32 MANU x64 MANU x88
MANU x128
Sensitivity enhance setting (SENS UP)
SENS UP setting
OFF AUTO MANU
1/60 OFF OFF OFF
1/100 1/100
OFF
1/100
1/125
|
1/2000
1/125
|
1/2000
OFF OFF
SHUTTER
SPEED
AES AES AES
OFF
MAIN MENU
> ↵
↵
↵
↵
↵
Camera title setting menu
Light control setting menu
AGC setting menu
Shutter speed setting
Sensitivity enhance Setting
B/W mode setting (*)
White balance mode setting menu (*)
Sub menu
End of menu display
(*) Note: KP-E500 is not displayed.
1) Press the SET button for longer than 2 seconds to display
the “MAIN MENU”.
2) Use the UP and DOWN buttons to shift the cursor to
“B/W MODE” ; the setting flashes.
3) Press the SET button to select the setting sequentially in
the following order.
SET button: OFF ON AUTO(H) AUTO(M) AUTO(L)
OFF : Color always mode; factory setting.
ON : B/W always mode
Raising sensitivity by color-B/W selection
[Only KP-DE500 type]
NOTE
1) Enhanced sensitivity can cause blurring of moving
images.
2) In the following types of cases, reduce the sensitivity
multiple.
Noise increases at high sensitivity and further
increases at high frequency.
The Shutter speed cannot be changed during
Auto and Manual SENS UP settings. Temporarily
set SENS UP to OFF when changing the Shutter
speed.
White flaws may become apparent at high
sensitivity, but these are not due to malfunction.
MAIN MENU
> ↵
↵
↵
↵
↵
Camera title setting menu
Light control setting menu
AGC setting menu
Shutter speed setting
Sensitivity enhance Setting
B/W mode setting (*)
White balance mode setting menu (*)
Sub menu
End of menu display
(*) Note: KP-E500 is not displayed.