Filter
Top Products
1.Color system NTSC
2.Pickup element 1/2-inch progressive scan frame
interline CCD( with on-chip microlenses )
Total pixels 680(H)
× 500(V)
Effective pixels 658(H)
× 489(V)
Scanning area 6.58(H)
× 4.89(V)mm
Sell size 10.0(H)
× 10.0(V)µm
3.Scanning system 2:1 interlace
4.Scanning frequency Hor. 15.734kHz
Ver. 59.94Hz
5.Sync system internal
6. Video signal output KP-DE500 VBS1.0Vp-p/75
KP-E500 VS1.0Vp-p/75
7. Signal processing Digital processing ( input 10 bits )
8. S/N( Y signal ) More than 50dB
(AGC,enhancer and gamma OFF)
9. Resolution( Y signal at center ) Hor. 480 lines
Ver. 350 lines
10.Minimum illumination
KP-DE500
0.0009 lx ( Color, F1.2, AGC ON, SENS UP OFF, 50IRE )
0.00005 lx( Monochrome, F1.2, AGC ON, SENS UP OFF, 50IRE )
0.000015lx(Color 64 time accumulation, F1.2, AGC ON, 50IRE)
0.0000008lx
(Monochrome 64 time accumulation, F1.2, AGC ON, 50IRE)
KP-E500
0.00003 lx
(Monochrome, F1.2, AGC ON, SENS UP OFF, 50IRE )
0.0000005 lx
(Monochrome 64 time accumulation, F1.2, AGC ON, 50IRE)
11. Sensitivity setting AGC OFF/ON(Factory setting is1/60)
Manual Gain Adjustable at AGC OFF
Limit Gain Adjustable at AGC ON
12. Electronic shutter speeds
Selectable in 7 steps & AES
( Factory setting is 1/60 )
1/60,1/100,1/125,1/250,1/500,1/1000,1/2000
AES:From 1/60 second to 1/2000 second
13.
Integration multiple [SENS UP] setting
Automatic or Manual (fixed) ( Factory setting is OFF )
Automatic : 2,4,6,8,10,12,16,32,64 times
Manual : 2,4,6,8,10,12,16,32,64,88,128 times
14. Backlight compensation ON/OFFswitchable
Sensing area:selectable from 9 areas
15.Auto-iris lens outputs
Video signal
Input type lens
Luminance signal
1.0Vp-p/high impedance
Power supply 12V DC 40mA
Iris control voltage input
(galvanometer)
Coupling coil impedance
Damper:1150 ±10%
Drive:190 ±10%
Specifications
34