Getting Started
24
Removing the Battery
1. Push the BATT EJECT lever to open the battery compartment cover.
2. Push the battery release lever in the direction of the arrow; the battery
will come out. Pull the battery forward to remove it.
Note: The battery is ejected by the force of a spring. Be careful not to drop
the battery.
Checking the Battery's Charge
A battery charge indicator is located on the upper right corner of the
viewfinder. One of three symbols displays when the battery is used.
This symbol indicates a fully charged battery.
This symbol indicates a partially charged battery.
This flashing symbol indicates a battery nearly out of power.
Use an alternative power source or charge the battery before continuing to
use the camera/recorder.
Using Alternative Power Sources
Using the AC Adapter/Charger
Please ensure that the CAM/OFF/VIDEO switch is in the OFF position
whenever attaching or detaching any power supply (ie. battery, AC
adapter/charger, etc.)
Before attaching the external power cord check that there is no sand,
water or dirt adhering to the terminal of the attachment section. If anything