Filter
Top Products
Advanced Techniques
53
9. Continue programming as described above until you have entered up to
four different segments.
10. Load a blank tape, then set the VCR to the record pause mode.
11. Point the remote control at the receiver on the VCR and press the
COPY START button to start simple programmable edit.
The camera/recorder automatically searches for the beginning of the
first segment and starts playback. The recording VCR automatically starts
recording.
After recording the first segment, the camera/recorder automatically
searches for the beginning of the next segment and resumes playback.
The recording VCR is automatically released from the record pause mode
and resumes recording.
It continues recording and pausing until all the programmed segments
are edited.
12. When simple programmable edit is finished the camera/recorder will
enter the stop mode, and the VCR will enter the record pause mode.
Note: After the simple programmable edit is finished, the programmed data is
erased. If you want to continue editing other segments, repeat steps 5 ~ 12.
Note: If you make a mistake in the middle of programming or want to correct
the programmed data, start again from the beginning.
Note: Most VCRs (recording machine) may be released from the record
pause mode if it continues for more than five minutes.
Note: The dubbing start and end positions may slightly drift from the specified
positions when certain VCRs are used.
To End Programmable Simple Edit
Press the PROGRAM button to remove the program display from the
viewfinder. Then press the stop button on the recording VCR to set it to
the stop mode.
Note: if the CAM/OFF/VIDEO switch of the camera/recorder is set to OFF or
CAM when the recording VCR is in the record pause mode, the VCR enters
the record mode.
Controlling Your TV with the Camera/Recorder's Remote
The remote control is designed to be compatible with many televisions,
but will not work with every one made. If your TV does not respond the
way it should when you program it as explained below, this remote may be
incapable of operating it.
Once you have programmed the remote, you won't have to do it again
until you change the batteries.
This remote control can be used with your TV as well as the
camera/recorder, as long as your TV comes with a remote control. This
feature comes in handy -- you don't have to juggle two remotes.
The remote control is compatible with the fourteen makes of TVs listed
below -- but don't be alarmed if yours is not on our list. You may still be
able to program the remote for your TV.
Every TV that comes with a remote control is set up to detect certain