CV-A1
1. General
The CV-A1 is a monochrome progressive scan 1/2” CCD camera with 1.4 Megapixel resolution. It
is designed for automated inspection, featuring a small housing and a wide range of unique
functions. The asynchronous trigger can be set to work in several modes, to allow such functions
as pulse width controlled shutter, programmable shutter speed and long time integration. To
obtain higher frame rates, the camera has partial scanning and both horizontal and vertical
binning.
All modes and functions can be set via an RS-232C interface, greatly reducing the need for
mechanical switches or jumpers.
CV-A1 Camera Control Tool for Windows 98/NT/2000 contents a camera control program and
tools for making your own program.
Camera ID, model name and user ID is present in the camera from revision B. S/N E102910.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of Camera Control Tool for CV-A1 can be downloaded from: www.jai.com
2. Standard Composition
The standard camera composition consists of the camera main body and operation manual.
3. Main Features
• New compact size 1/2” progressive scan monochrome CCD camera
• 16 full frames 1392 (h) x 1040 (v) 4.65 µm square pixels per second
• Up to 75 fps with 1/6 partial scan.
• Double speed and double sensitivity with V binning
• 4 times normal sensitivity with H and V binning
• Internal, external HD/VD or random trigger synchronization
• Edge pre-select, programmable shutter and pulse width control trigger modes
• Start/stop mode (trigger/ext. VD) and long time exposure (ext. VD interval)
• Shutter speeds from 1/16 to 1/200,000 second in continuous mode
• Triggered shutter speed up to 1/12,000 second
• Programmable shutter speed from 1.3 H to 1023.3 H
• Pulse width controlled shutter 1.3 H to 2000 H
• H synchronized or H non-synchronized accumulation in PWC mode
• Frame delay readout 1.3 H to 2000 H for pulse width controlled shutter
• Smear-less readout mode for edge pre-select and programmable shutter
• Exposure enable EEN, write enable WEN and pixel clock output
• Short ASCII commands for fast mode set-up via serial port
• Set-up by Windows 98/NT/Win2000 software via RS 232C
• Compact housing with C-mount
- 2 -
JPT 08-10-03: 11:01