Open as PDF
2.6 MECHANISM ADJUSTMENTS
2.6.1 Assembling slide deck assembly and main deck assembly
1. Loosen the screw A.
2. Set the mechanism in the PLAY mode.
(Refer to “2.3.2 Explanation of mechanism mode”.)
3. Press the end face B of the slide deck assembly (reel
disk side) and the end face C of the main deck assem-
bly (drum assembly side) with uniform force so that the
two assemblies are tightly pressed to each other. Further-
more, press the part D and tighten the screw A.
Tightening torque for screw
: 0.069 N·m (0.7 kgf·cm)