Filter
Top Products
20 EN
1
SELECT OPERATION MODE
Turn the Power Dial to “PLAY” while pressing
down the lock button located on the dial.
•The power lamp comes on.
2
PULL OUT VIEWFINDER
Pull out the viewfinder fully.
3
START SEARCH
Press 6/
4
, then press
2
or
3
. Watch in the
viewfinder for the spot where you want to
begin recording.
4
ENGAGE STILL MODE
Once you find the spot at which you want to
start recording, press 6/
4
twice to engage the
Still mode.
5
START RECORDING
Turn the Power Dial to any operation mode
except “PLAY” and “OFF”, then press START/
STOP.
•Start recording from a point prior to the end
of the last recording. A few seconds of the
end of the last recording will be erased.
NOTE:
Even if you start recording from the end of the
previous recording leaving no blank space, there
may be situations where a clean transition is not
possible.
Recording From The Middle Of A Tape
When removing a tape on which you were recording, or when you resume recording on a tape after playing
back the recording previously made (without taking the tape out between recordings), perform this proce-
dure.
RECORDING
Basic Recording (Cont.)
OFF
P
L
A
Y
A
M
5S
OFF
P
L
A
Y
A
M
5S
Stop button
Play/Pause button
Lock button
Power Dial
Rewind button
Power lamp
Fast-forward
button
START/STOP button