JVC GR-DVL510 Camcorder User Manual


 
EN31
1F 2S
3S
5F
4F 6F
EXIT
<
PROTECT
>
1F 2S
3S
5F
4F 6F
EXIT
<
PROTECT
>
DPOF
ATFORM
NRETUR
INDEX
PROTECT
EDELET
Display
Power Switch
MENU/BRIGHT Wheel
Lock Button
If Protection
is removed
PROTECT Index
Screen
Normal playback
Padlock mark
Normal playback
Protecting Images
The Protect mode helps prevent the accidental erasure of
images. When a padlock mark is displayed next to the
Picture Quality indication, that image cannot be deleted.
1
Set the VIDEO/DSC Switch to , then set the
Power Switch to while pressing down the
Lock Button.
A stored image is displayed.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate the MENU/BRIGHT wheel to
select MEMORY and press it. The MEMORY
Menu appears.
3
Rotate the MENU/BRIGHT wheel to select
PROTECT and press it. The PROTECT Index Screen
appears.
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3
above.
4
Rotate the MENU/BRIGHT wheel to move the green
frame to the desired image and press it. A
padlock mark appears on the selected image.
Repeat this procedure for all images you do not wish
to delete by accident.
5
Rotate the MENU/BRIGHT wheel upward to select
EXIT and press it. The normal playback screen
appears.
NOTE:
When the memory is initialized or corrupted, even
protected images are deleted. If you do not want to lose
important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3
above.
4
Rotate the MENU/BRIGHT wheel to move the green
frame to the desired image and press it. The
padlock mark located above the image disappears
and the image is no longer protected.
Repeat this procedure for all images from which you
wish to remove protection.
5
Rotate the MENU/BRIGHT wheel upward to select
EXIT and press it. The normal playback screen
appears.
Menu Screen
VIDEO/DSC Switch (Open the
LCD monitor to access this switch)