JVC GR-DVL510 Camcorder User Manual


 
54 EN
T
P
O
US
C
H
OP
Y
SN
T
A
O
PS
T
H
A
O
P
T
E
REC
SNAPSHOT Button
Fast-Forward Button (
3
)
Rewind Button (
2
)
Lock Button
Dubbing Images Stored In A Memory Card
To A Tape
(GR-DVL915/DVL815/DVL510 only)
Images can be dubbed from a memory card to a tape.
1
Load a memory card ( pg. 14) and cassette
( pg. 12).
2
To locate the point where you wish to dub a still
image, play back the tape. Stop playback at the
desired point.
3
2
Set the VIDEO/DSC Switch to , then set the
Power Switch to while pressing down the
Lock Button located on the switch.
4
3
To select a still image to be dubbed, perform Index
Playback ( pg. 29), Auto Playback ( pg. 28) or
press
2
or
3
to select the image you wish.
5
To engage Dub-Standby, press SNAPSHOT. The
message TO COPY TO TAPE PUSH "SNAPSHOT"
appears.
6
While the message is being displayed, press
SNAPSHOT. The selected still image is recorded on
the tape for approx. 5 seconds.
The indicator disappears when dubbing is
complete.
NOTE:
If SNAPSHOT is pressed in step 5 when the tapes erase
protection tab is set to SAVE, the message COPYING
FAILED is displayed.
Display
DUBBING
(cont.)
Power Switch
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)