Filter
Top Products
30 EN
Master Page: Left
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 8 in “To Print All Still Images
(One Print For Each)” (੬ pg. 29).
2 Press + or – to select
“CURRENT”, and press
SET/SELECT. The DPOF
screen appears.
3 Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
4 Press + or – to select the number indication (00),
and press SET/SELECT.
5 Select the number of prints
by pressing + to increase
the number, or – to
decrease the number, and
press SET/SELECT.
● Repeat steps 3 through 5
for the desired number
of prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the
image again and change the number.
6 Press + or – to select
“RETURN”, and press SET/
SELECT. The “SAVE?”
appears.
● If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7 Press + or – to select “EXECUTE” to save the
setting you have just made, and press SET/
SELECT.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 – 8 in “To Print All Still Images
(One Print For Each)” (੬ pg. 29).
2 Press + or – to select “RESET”, and press SET/
SELECT. The DPOF screen appears.
3 Press + or – to select “EXECUTE”, and press SET/
SELECT. The normal playback screen appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still
images.
You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Press MENU. The Menu
Screen appears.
5 Press + or – to select
“FORMAT”, and press
SET/SELECT. The FORMAT
screen appears.
6 Press + or – to select
“EXECUTE”, and press
SET/SELECT. The memory
card is initialised.
● When initialisation is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND STORED” appears.
● To cancel initialisation, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
00
SHEETS
DPOF
05
DPOF
EXECUTE
SAVE?
CANCEL
Initialising A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialisation. If the memory card becomes
corrupted initialise it.
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO .RESET
FORMAT
ORMATF
EXECUTE
DATA?EXISTING
ERASE ALL
RETURN
D.S.C. PLAYBACK (cont.)
GR-DVP10PAL.book Page 30 Tuesday, January 6, 2004 10:55 AM