Filter
Top Products
8 EN
MODEDEMO –
ON
OFF
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place
when “DEMO MODE” is set to “ON”
(factory-preset).
Ⅲ Available when the Power Switch is set to
“ ” or “ ” and no cassette is in the
camcorder.
Ⅲ Performing any operation during the demon-
stration stops the demonstration temporarily. If
no operation is performed for more than 1
minute after that, the demonstration will
resume.
Ⅲ “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
Ⅲ To cancel Automatic Demonstration:
1. Set the Power Switch to “ ” while
pressing down the Lock Button located on
the switch and press MENU. The Menu
Screen appears.
2. Press + or – to select “ SYSTEM” and
press SET/SELECT. The SYSTEM Menu
appears.
3. Press + or – to select “DEMO MODE” and
press SET/SELECT. The Sub Menu appears.
4. Press + or – to select “OFF” and press SET/
SELECT.
5. Press + or – to select “ RETURN”, and
press SET/SELECT twice. The normal screen
appears.
NOTE:
If you do not slide the lens cover down, you
cannot see the actual changes of the Automatic
Demonstration activated on the LCD monitor or
viewfinder.
Sub Menu
Lock Button
MENU Button
Power Switch
+, – ButtonSET/SELECT Button