Filter
Top Products
18
EN
Necessary Settings before Use
Charging the Battery Pack
1 Close the LCD monitor to turn off the
camera.
2 Attach the battery pack.battery pack.
BATT.
3 Connect the AC adapter.
•
The power/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
finished.
Required charging/recording time
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack Charging time
Recording
time
BN-VF815U
(Provided)
2 hr. 40 min. 1 hr. 25 min.*
BN-VF823U 3 hr. 50 min. 2 hr. 10 min.*
NOTE
The actual recording time may shorten
depending on the recording environment, such
as when recording scenes with fast moving.
To detach the battery pack
Slide and hold BATT. (step 2), then remove
the battery pack.
To check the remaining battery power
See page 24.
NOTES
•
You can also use the camera with just the AC
adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)