JVC GZ-HD40AG Camcorder User Manual


 
52
EN
Changing the Menu Settings (Continued)
Menus (! VIDEO)
Settings: [ ] = Factory-preset
[ GAIN UPGAIN UP
Makes the subject appear bright
automatically when you record in
dark places. However, the overall
color tones appear grayish.
OFF: Deactivates the function.
AGC
: Electrically brightens the scene in dark place.
[AUTO]
: Automatically brightens the scene when it is dark.
(Becomes brighter than [AGC])
X x.v.Color
Records video in the color range
suitable for viewing in an x.v.Color™
compliant TV.
[OFF]: Deactivates the function.
ON
: Activates the function.
NOTE
If you edit videos in MPEG-2 TS format on a computer, set
[x.v.Color] to [OFF] before the recording.
REGISTER EVENT
See page 25.
Y BASIC SETTINGS
[BASIC SETTINGS] menus (Z p. 54)
N
FOCUS ASSIST
When this function is used, the
outline of the focused object is
displayed in the selected color.
RED / GREEN / [BLUE]
o WIND CUT
Reduces noise caused by wind.
[OFF]: Deactivates the function.
ON
: Activates the function.
Y MIC LEVEL
Displays the input level.
OFF: Deactivates the function.
[ON]
: Activates the function.
d
MIC LEVEL SETTING
Increases or decreases the
sensitivity of the microphone.
–2 to +2
NOTE
When the external microphone is connected, you can adjust
the sensitivity.
e
HEADPHONE VOL. ADJ.
Adjusts the headphone volume.
Adjust the volume by moving the set lever to £ / ¤, then press
down. Adjust the headphone volume during recording.
+ MONITOR OFF*
Enables you to turn off the backlight
on the monitor temporarily.
* playback mode only
YES: Turn off the backlight. (no display)
[NO]
: Turn on the backlight.
NOTE
To turn on the backlight again, perform any operation such as
zooming.
f
ON-SCREEN DISPLAY*
Displays the icons and date on the
screen.
* playback mode only
OFF: Hides all the text and icons on the screen.
[DISPLAY ALL]
: Displays all the text and icons.
DISPLAY DATE ONLY
: Hides the text and icons and
displays the date only.
DISPLAY DATE 5 SEC
: When the recording date changes
or images are displayed, the date is displayed for
approximately 5 seconds.