Filter
Top Products
62
EN
Troubleshooting (Continued)
The following phenomena are not malfunctions.
•
LCD monitor momentarily becomes red or black when sunlight is recorded.
•
Black spots, or red, green, or blue spots appear on the LCD monitor.
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be
ineffective.)
Maintaining HDD Performance
Periodically perform [CLEAN-UP HDD].
If a malfunction occurs in the HDD
! Perform [CLEAN-UP HDD].
# If this does not solve the malfunction, perform [FORMAT HDD]. (All data is deleted.)
$ If this does not solve the problem, perform the disc check function from a PC after formatting.
% If this does not solve the problem, contact the JVC customer service for repairs.
To reset the camera
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camera, then reattach it.
# Execute [FACTORY PRESET] in the [BASIC SETTINGS]. (Z p. 57)
Cleaning
Before cleaning, turn off the camera and remove the battery pack and AC adapter.
To clean the camera
Wipe the camera gently with a soft cloth. If the camera is particularly dirty, dip the cloth into
diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a dry
cloth.
To clean the LCD monitor
Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens
Wipe gently with lens cleaning paper.
NOTES
•
Avoid using strong cleaning agents such as benzine or alcohol.
•
Mold may form if the lens is left dirty.
•
When using a cleaner or chemically treated cloth, refer to the cautions for each product.