JVC HF R30 Camcorder User Manual


 
Video 115
NOTES
A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
The captured video snapshot scene is saved to the same memory that
contains the source scene.
Video snapshot scenes cannot be captured from any of the following
types of scenes.
- Scenes shorter than 1 second
- &/% Scenes that were edited using the supplied software
VideoBrowser and were then transferred back to the camcorder.
When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
Capturing Photos
The size of the captured photos will be 1920x1080 and it cannot be
changed.
Please read the IMPORTANT section before using an Eye-Fi card.
1 Play back the scene or story from which you want to capture the
photo.
2 Pause the playback at the point you want to capture.
3 Touch [PHOTO].
4 Touch the screen and then touch [Ñ] to stop the playback.
IMPORTANT
When capturing photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also Using an Eye-Fi card (A 146).
COPY