Filter
Top Products
E36
@@@@@@
4. Basic operations (continued)
Saving images from the memory to an MO disk
It is possible to save images stored in the main unit memory to an MO drive connected via the
SCSI terminal when in the FREEZE or PLAY mode.
(To output to an MO drive connected to a PC, see Page 64 7. Connecting to a PC)
Ⅵ Set to either the FREEZE or PLAY mode.
1.
Check to make sure that dip switches 1 and 2 are set to
OFF as shown in the diagram on the left.
2.
Press the SEND button. WRITE TO MO OK? message
will appear on the monitor connected to the MONITOR
terminal.
3.
To write to the MO, press the MODE button (to cancel,
press the MENU button). While in operation, WRITE TO
MO OPERATION will appear for approximately 3 sec-
onds.
4.
When data is successfully written to the MO, WRITE
TO MO OK FILE NAME: F70ⅪⅪⅪⅪ.TIF will appear for
approximately 3 seconds. (each Ⅺ indicates a number)
5.
When data is not successfully written to the MO, one of
the following error messages will appear for approxi-
mately 3 seconds.
ERROR : SCSI (check the cable)
ERROR : WRITE (write error)
ERROR : FORMAT (format the disk)
ERROR : DISK (bad MO disk)
ERROR : DIRECTRY (directory error)
ERROR : READ (read error)
ERROR : MO (Other MO disk error)
ETOWR I T MO
OK?
OK : "MODE
"
CANCEL: "MENU "
ETOWR I T MO
ATIOOPER N
ETOWRI T MO
NAMFILE :E07F000IFT1.
OK
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
SEND
MODE
MENU
ON 1 2 3 4
Output completed
SCSI
terminal
Undefined
Dip switches
Output confirmation
Output in operation