Filter
Top Products
E40
@@@@@@
5. Various recording methods
Recording a PC monitor
Horizontal line noise will appear on the screen when attempting to record images on a PC
monitor or display. To clear this noise, the main unit shutter speed must be adjusted with scan
speed of the monitor.
1.
Press the MODE button to enter the REC mode (REC
LED on), then lightly press the MENU button to display
the REC quick menu screen.
2.
Press the DOWN button to select SHUTTER, then press
SET (SHUTTER will be displayed in purple).
3.
Use the DOWN button to change the set value to V.
SCAN, then press the SET button (SHUTTER will re-
turn to white).
4.
Next, press the DOWN button to select SHUTTER
SPEED, then press the SET button.
5.
Press either UP or DOWN to change the shutter speed.
When a black bar can be seen on the screen:
decrease the shutter speed by pressing the DOWN
button.
When a white bar can be seen on the screen:
increase the shutter speed by pressing the UP button.
6.
Press the SET button when the bar is at its minimum.
MEMO
At this time, pressing the MENU button will return the unit to its
previous settings without confirming the changes.
7.
Press the MENU button to return to the normal screen.
REC--- MENU(QUICK)---
AE LEVEL 0
SHUTERE :
:
IRIS LEVEL 128
:
V.SCAN
:1 3
0
:S
/
TEP
SPEED
SENS IT IVI TY
LEVEL : ISO100
ALC MAX :
I
I
SO400
SEND PRIORITY: MO
REC quick menu screen
PC monitor
Bar
MEMO
• The vertical scan frequency differs depending on the PC type and the bar may not be completely
cleared away. The frequency may also change depending on the software used.