Filter
Top Products
12
Menu settings (continued)
CAMERA MODE SELECT screen
Item
V.PHASE
POSITION TEXT
LOCATION
AUTO FLIP
VAR.PAN SPEED
AREA TITLE
ALM.TEXT SIZE
Factory
setting
127
UP–L
OFF
OFF
OFF
DOUBLE
Variable
range
0 ~ 255
UP–L, DOWN–L
UP–C, DOWN–C
UP–R, COWN–R
OFF
ON
OFF
ON
OFF
ON
NORMAL
DOUBLE
Function
Set when adjusting the vertical of other cameras operating in
the line lock (LL) mode.
Adjust while viewing the screen.
The value will become smaller when the pan/tilt lever is pressed
to the left (8).
The value will become larger when the pan/tilt lever is pressed
to the right (t).
Used to set the display position of position titles.
UP: positions the title at the top of the screen.
DOWN: positions the title at the bottom of the screen.
L: positions the title towards the left of the screen.
C: positions the title in the center of the screen.
R: positions the title towards the rigt of the screen.
The camera is flipped over automatically by 180 degree at the
tilting limit.
(This makes it possible for the camera to continue tilted straight
down ward.)
ON: Auto flip will funtion
OFF: Auto flip will not funtion
The panning speed is varied automatically according to the zoom
ratio of the lens.
(The panning speed decreases when the zoom lens is set near
TELE and increases when it is set near WIDE).
ON: Var. pan speed will function
OFF: Var. pan speed will not function
The Area Title function divides the space covered by a camera
into sixteen units, with a 16-character ID allocated to each unit.
(AREA 1 ~ AREA16)
The set AREA TITLE is displayed when manually panning the
camera.
ON: Area title is displayed
OFF: Area title is not displayed
The character size to display during ALARM is set.
AREA
16
AREA
1
AREA
2
AREA
3
ALARM
ALARM
NORMAL SIZE DOUBLE SIZE