Filter
Top Products
40
2-4 Other Settings Using the "VN-C655U Setup Tool" (4. Recording Setting)
● When an alarm is activated, image recording can be carried out in one of the following two ways.
One way, local recording, saves images to the VN-C655 memory, and the other record images
with [V.Networks Controller] and saves them to the PC hard disc drive, etc. (
☞
Page 67)
Settings (Step 2 Network Settings)
This function records the image to the memory of VN-C655 when an alarm is activated.
● Setting the [Frame Rate] screen
1
4
3
2
● Setting the [Trigger Recording] screen
1.
Start up the "VN-C655U Setup Tool" and select [Recording]. To make new values
effective, click on [Apply], followed by [OK].
Select alarm input signal “Trigger” for starting local
recording.
To set the frame rate for local recording, select "Change
the Recording Frame Rate during trigger recording",
followed by selecting the frame rate accordingly.
Default frame rate is set at 10 fps. A frame rate of 10
fps for recording will be used when this box is not
checked. (Set values: 30, 15, 10, 8, 6, 5, 4, 3, 2, 1)
For setting the recording time.
This can be set up to 30 seconds before and 60
seconds after the alarm input.
Cautions
● [Before trigger] and [After trigger] values cannot
be set to "0" at the same time.
●
Due to the memory capacity of VN-C655, recording
time set for [Before trigger] and [After trigger] may
differ from the actual maximum recording time.
(Example)
If 320x240 (15 fps)/640x480 (5 fps) with a
compression rate of 2, the actual recording time
is 5 to 0 and 30 to 35 seconds, before and after a
trigger respectively.
For setting the priority.
Frame Rate :
Priority is given to frame rate settings.
Recording Time
:
Frame rate is automatically adjusted
such that recording can be performed
according to the specified recording
time.
VN-C655(B)_p40-p53 05.3.16, 1:23 PM40