Filter
Top Products
55
3-2 Features that Allow Setting Using the V.Networks Controller
The V.Networks Controller can be used to perform settings for image size and alarm.
1 2 3
1
File
New : Creates a new file if the camera
is connected for the first time.
Delete : Deletes a file.
Motion Detection Standby
: Select the camera for which
the Motion Detection Standby
function is to be enabled.
Exit : Exits the controller.
2
View
Image Size : Sets the image display size.
JPEG : 640 x 480
320 x 240
Upside Down: Displays the image inversely.
3
Control (C)
Auto Pan : Select this item and click to
start the Auto Pan operation.
Auto Patrol (Mode1 to Mode 3)
: Select a mode for this item and
click to start the Auto Patrol
operation for the selected
mode.
Auto Trace : Select this item and click to
start the Auto Trace operation.
Auto Pan Stop
: Stops the Auto Pan operation.
Auto Patrol Stop
:
Stops the Auto Patrol operation.
Auto Trace Stop
:
Stops the Auto Trace operation.
Notes
● The following setting are disabled during
Auto Pan:
• Auto Pan Setting
• Auto Patrol Setting
• Auto Trace Setting
• Preset Position Setting
• Pan Control
● The following setting are disabled during
Auto Patrol:
• Auto Pan Setting
• Auto Patrol Setting
• Auto Trace Setting
• Preset Position Setting
• Pan/Tilt Control
• Zoom Control
● The following setting are disabled during
Auto Trace:
• Auto Pan Setting
• Auto Patrol Setting
• Auto Trace Setting
• Preset Position Setting
• Pan/Tilt Control
• Zoom Control
• Focus Control
C655(B)_p54-p77 05.3.16, 1:29 PM55