Filter
Top Products
73
3.
Perform setting.
1
Set the mode. Setting can be performed
from Modes 1 to 3.
Click the tab of the respective mode for
setting.
Auto Patrol No.
Auto Patrol operates in the sequence of these
numbers.
2
Set the Position Number.
For each Patrol Number, set a Position
Number to move to in sequence.
3
Set the time interval.
Set the time for displaying each position
set in
2
.
(Unit: seconds)
4.
Close the window.
When setting is complete, click to close the window.
Note
For starting and stopping operations of
Auto Pan, Auto Patrol and Auto Trace,
please refer to Page 55.
C655(B)_p54-p77 05.3.16, 1:29 PM73