Kodak 8810 Photo Printer User Manual


 
Safety and Regulatory Information
B-3
Regulatory and Safety Compliance
Safety Complies with UL 60950-1
CAN/CSA C22.2 No. 60950-1-03
EN 60950-1
IEC 60950-1
Tested for Norwegian IT Power systems 240V phase to phase
Electromagnetic
Compatibility (EMC)
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. Operation of this
equipment in a residential area is likely to cause
interference in which case the user will be required to
correct the interference at his or her own expense.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
Requirements of the EMC directive 89/336/EEC were met
through compliance with the following:
EN 55022: 2006 Class A
EN 61000-3-2: 2006
EN 61000-3-3:1995 +A1:2001 +A2:2005
EN 55024: 1998+A1: 2001+A2: 2003
EN 61000-4-2 ESD
EN 61000-4-3 Radiated RF Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Conducted RF Immunity
EN 61000-4-8 Power Frequency Magnetic Field Immunity
EN 61000-4-11 Voltage Dips and Interruptions