Filter
Top Products
Doing more with your frame
www.kodak.com/go/support
25
The following types of standard picture frames will not fit on your EASYSHARE Digital
Frame.
■ Frames that secure a photo by pressing it between two pieces of glass.
■ A deep frame that’s designed to hold 3-dimensional objects instead of photos.
■ Frames with inserts in which the insert holds the standard picture size.
■ Frames with a hinged or otherwise non-removable back.
■ Frames with a curved or uneven mounting surface.
■ Frames with a round, oval, or other non-rectangular mounting area.
■ Frames in which you slide the picture into one end.*
■ Handcrafted frames.*
* You may be able to use these frame types. Check for individual frame compatibility.
General attachment details
1 If the faceplate that was packaged with your frame is attached, remove it (see
page 9).
2 Remove the back, backing material, and the glass from the standard picture frame.
Use CAUTION when handling the glass, the edges are sharp.
Store the original faceplate and contents of the standard picture frame in the box
that came with your digital frame. Keep for later use.
NOTE:
You must remove the glass.
The digital frame’s Quick Touch Border will not work with the glass
in place.
3 Place the standard picture frame face down on a protected flat surface, and place
the digital frame into the picture frame.
4 Attach the frames together according to the following directions. Keep any leftover
foam spacers for later use.
5 When attached, make sure the digital frame is secure within the picture frame and
can’t shift or move around.