Kodak 300 Photo Printer User Manual


 
Troubleshooting
www.kodak.com/go/support
21
Printer is
jammed
(Paper light,
cartridge light,
and/or On/Off
light may blink
quickly)
IMPORTANT:
Use only Kodak color cartridge & paper kits for your photo
printer. Do not use inkjet paper.
If the Paper light is blinking quickly:
1 Remove the paper tray (page 6).
2 Turn the power off for 5 seconds, then turn it back on.
Carefully remove the jammed paper if it does not automatically eject.
IMPORTANT:
Check the paper slot on the back of the photo printer for
jammed paper:
3 Remove the paper supply from the paper tray. Carefully "fan" the
paper to keep the sheets from sticking together.
4 Reload the paper tray. Do not exceed the fill line.
5 Re-install the paper tray, then press to resume printing.
If the Color cartridge light is blinking quickly, check the color cartridge:
IMPORTANT:
The color cartridge may lock in place if there is a paper error. Do
not attempt to remove the cartridge without first clearing the
paper error. Make sure the Paper light is off before attempting
to remove the cartridge (see Paper light under Photo printer
status lights, page 26).
Remove the color cartridge, remove any slack from the ribbon, then
re-install the cartridge (page 3).
If... Try the following