Filter
Top Products
Troubleshooting
www.kodak.com/go/support
27
Color cartridge light
Light status Cause Action/solution
IMPORTANT:
The color cartridge may lock in place if there is a paper error. Do
not attempt to remove the cartridge without first clearing the
paper error. Make sure the Paper light is off before attempting to
remove the cartridge (see Paper light).
Light is off The color cartridge is properly installed
and is working normally.
None required.
Light blinks Slow blink (for several seconds): the
color cartridge is nearly depleted.
None required.
Fast blink: there is a color cartridge jam Clear the jam (page 21), then press
.
Light glows
steady
The color cartridge is depleted. Install a new color cartridge
(page 3), then press .
The color cartridge is not installed or is
not fully seated.
Remove and re-install the color
cartridge (page 3), then press .