Filter
Top Products
Doing more with your camera
www.kodak.com/go/support
37
Customizing your camera
Use Setup to customize your camera settings.
1 In any mode, press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button.
5 Press the Menu button to exit.
NOTE: These settings remain until you change them.
NOTE: Press the LCD/Info button for information about camera settings and options.
Setting Options
Return to previous menu.
Liveview
Change liveview default to on or off.
NOTE: In some modes, the LCD turns on even if
the liveview option is set to Off. (To turn
the LCD on/off any time, press the
LCD/Info button.)
On (default)
Off
Orientation Sensor
Orient pictures so that they are displayed
with the correct side up.
On (default)
Off
Red-eye Pre-flash
Choose if the Red-eye flash fires
automatically before a picture is taken.
NOTE: The camera automatically corrects red-eye,
when the Red-eye Pre-flash is set to Off.
On (default)
Off