6 www.kodak.com/go/support
Getting started
Setting the date and time
Setting the date & time, first time
The message
Date and Time have been reset
appears the first time you turn on the
camera or if the battery is removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
2 Go to step 4 in Setting the date & time, anytime.
Setting the date & time, anytime
1 Turn on the camera. Press the Menu button.
2 Move the Joystick to highlight Setup Menu , then press the
OK button.
3 Move the Joystick to highlight Date & Time , then press the
OK button.
4 Move the Joystick to adjust the date and time. Move the
Joystick to advance to the next setting.
5 When finished, press the OK button.
6 Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera
clock when you connect the camera. See the EasyShare software Help for details.