Kodak Z7590 Digital Camera User Manual


 
Appendix
www.kodak.com/go/support
83
Upgrading your software and firmware
Download the latest versions of the software included on the EasyShare software CD
and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/z7590downloads.
Additional care and maintenance
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently
with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning
solutions unless designed specifically for camera lenses. Do not allow chemicals,
such as suntan lotion, to contact painted surfaces.
Do not place your camera near equipment, such as electric motors.
Electro-magnetic induction may corrupt pictures or cause camera malfunctions.
Rapid changes in temperature can cause harmful condensation. Keep your camera
in an airtight plastic bag and let it adjust to temperature before removing it from
the bag.
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
www.eiae.org or the
Kodak Web site at www.kodak.com/go/z7590support.