Filter
Top Products
Troubleshooting
www.kodak.com/go/support
71
Picture is too light ■ Reposition camera to reduce the amount of available light.
■ Turn flash off (page 23).
■ Move so that the distance between you and the subject is
within the effective flash range (page 23).
■ To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■ Use P mode to adjust the Exposure and Flash Compensations
(page 22).
Picture is not clear ■ To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■ Clean the lens (page 83).
■ Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■ Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
If... Try one or more of the following