Filter
Top Products
Troubleshooting
42
Camera ready light status
Status Cause
Ready light glows
steady green.
Shutter button is pressed halfway down. Focus and exposure
are set.
Ready light blinks
green.
Picture is being processed and saved to the camera.
Pictures are being transferred to computer; camera is
connected.
Camera firmware upgrade is in process.
Ready light glows
steady orange.
Camera is in Favorites mode.
Ready light blinks
orange.
Flash is not charged. Wait. Resume picture-taking when the
light stops blinking and turns off.
Auto exposure or auto focus are not locked. Release the
Shutter button and recompose the picture.
Ready light glows
steady red.
Camera’s internal memory or card is full.
Transfer pictures to the computer (page 37), delete pictures
from the camera (page 25), switch storage locations
(page 19), or insert a card with available memory (page 7).
Camera processing memory is full. Wait. Resume picture-
taking when the light turns green.
Card is read-only. Change storage location to internal
memory (page 19), or use a different card.
Memory card speed is slow. Card cannot be used to take
videos.
Change storage location to internal memory (page 19). Use
this card to take pictures only.
Ready light blinks red
and camera turns off.
Battery is low or exhausted. Recharge the battery (page 2).
Ready light