Filter
Top Products
56 www.kodak.com/go/support
Troubleshooting
Eye-Fi problems
Picture is too dark. ■ Reposition the camera for more available light.
■ Use Fill flash (see page 14) or change your position so light is not
behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on page 59.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■ In Program AE mode, adjust the Exposure Compensation (see
page 21).
Picture is too light. ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (see page 14).
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on page 59.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■ In Program AE mode, adjust the Exposure Compensation (see
page 21).
Status Solution
Get support for Eye-Fi
Cards and Software.
Go to support.eye.fi
Eye-Fi Card is not
working in this
camera.
■ Choose an Eye-Fi X2 Card or higher with a firmware version of
4.5174 or higher. (View and update firmware using the Eye-Fi
Center Software that accompanies the card.)
■ The camera must be turned on to transfer pictures to the
computer or mobile device.
Status Solution