Filter
Top Products
Troubleshooting
www.kodak.com/go/support
57
Direct printing (PICTBRIDGE enabled printer)
problems
Eye-Fi Endless Memory
is not working.
CAUTION:
If you’re using an Eye-Fi Card in this camera,
it’s critical that you disable (don’t turn on)
Endless Memory Mode in Eye-Fi Center
Software.
Eye-Fi Card gets warm. ■ This is normal.
Camera battery life is
shorter.
■ Battery life is reduced when using an Eye-Fi Card.
Transferring pictures is
slow using the Eye-Fi
Card.
■ For the best reception when transferring pictures to a computer
or mobile device, the rear (LCD side) of the camera should face
the Wi-Fi access point.
Status Solution
Cannot find the
desired picture.
■ Use the Direct printing menu to change the image storage location.
The Direct printing
menu interface turns
off.
■ Press any camera button to redisplay the menu.
Cannot print pictures. ■ Make sure there is a connection between the camera and the
printer (see page 48).
■ Make sure the printer and the camera have power.
Camera or printer
displays an error
message.
■ Follow the prompts to resolve the issue.
Status Solution