Filter
Top Products
Print Center/Printer Setup Utility Settings
15
When Using a Network Connection
The network connection settings can be specified in one of three ways:
Rendezvous setting, IP printing setting and Specifying Port 9100. We recom-
mend using the Rendezvous setting.
Rendezvous (OpenTalk) Setting
" Rendezvous (OpenTalk) should be enabled by default. However, if
you are unable to connect to the printer, enable Rendezvous
(OpenTalk) from the Rendezvous Configuration window in Page-
Scope Web Connection (refer to chapter 5, “Using PageScope
Web Connection” ).
1 Connect the printer to an Ethernet network.
2 Open Print Center, which can be accessed by clicking Macintosh HD,
then Applications, then Utilities.
3 Click Add in the Printer List.
4 Select Rendezvous from the pop-up menu.