Filter
Top Products
43
CONTINUOUS ADVANCE
1. Press the drive-mode button until
continuous advance indicator appears
on the data panel.
2. Press and hold the shutter-release
button to begin taking a series of
pictures.
• The camera takes a maximum of 1.7 frames per second when the shutter-
speed is 1/250 second or above, flash set to flash cancel, and new
batteries. The frame rate is slower when using the built-in flash as the flash
must charge between exposures. With accessory flashes, the shutter will
continue to release even if the flash is charging.
•With moving subjects or the sports subject program, the shutter will release
only when the camera has focused on the subject between exposures.
•To return to single frame mode, press the drive-mode button until single
frame advance indicator appears on the data panel.
• AF zoom xi and power zoom lenses cannot be zoomed when taking
pictures with continuous advance.
In this mode, the camera continues to release the shutter and
advance the film as long as the shutter-release button is held down.
2165_E.qxd 03.2.10 2:06 PM Page 43