Konica Minolta DiMAGE G600 Digital Camera User Manual


 
18 GETTING UP AND RUNNING
INSTALLING AND REMOVING A MEMORY CARD
Always turn off the camera and
confirm the indicator lamps are out
before changing the memory card,
otherwise the card may be damaged,
and data lost.
1
2
3
4
An SD Memory card, MultiMediaCard, or
Memory Stick must be inserted for the
camera to operate. If a card has not been
inserted, a no-card warning appears on the
LCD monitor.
Slide the battery-chamber door toward the
side of the camera to release the safety
catch (1). Open the door.
Insert the memory card all the way into the
card slot and then release (2). The Memory
Stick slot is next to the battery; the SD
Memory Card / MultiMediaCard slot is next
to the back of the camera. The card
should catch in the slot. Always push
the card in straight, never at an angle.
Never force the card. If the card does not
fit, check that it is oriented correctly.
To eject a memory card, press the card into
the slot and release (3). The card can then
be pulled out.
Close the battery-chamber door and slide it
toward the camera to engage the safety
catch (4).