Filter
Top Products
85
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows or Macintosh operating systems.
CONNECTING TO WINDOWS 98 AND 98 SE
Before connecting the camera to the computer, place the DiMAGE Viewer CD-ROM in
the CD-ROM drive. The DiMAGE installer menu should automatically activate. To
automatically install the Windows 98 USB driver, click on the starting-up-the-USB-device-
driver-installer button. A window appears to confirm that the driver should be installed;
click “Yes” to continue.
Automatic Installation
When the driver has
been successfully
installed, a window
appears. Click “OK.”
Restart the computer
and connect the camera
(p. 84) to complete the
operation.