Filter
Top Products
28
FLASH MODES
The flash can be used when taking still
images. To select the flash mode, press the
right key of the controller (1) until the
appropriate mode is displayed. The active
flash mode is displayed in the top left
corner of the LCD monitor.
Autoflash - the flash fires automatically in
low-light conditions.
Red-eye reduction - the flash fires a single
burst before the main flash burst to reduce
red-eye; an effect caused by light reflected
from the retina. Use in low-light conditions
when taking photographs of people or
animals, the pre-flashes contract the pupils
of the subject’s eyes. Red-eye reduction is
used with fill flash with manual exposure.
Fill flash - the flash fires with each
exposure regardless of the amount of
ambient light. Fill-flash can be used to
reduce harsh shadows caused by strong
direct light or sunshine.
Night portrait - for flash portraits at night.
The camera automatically balances the
flash and background exposures. When
taking portraits, ask your subject not to
move after the flash burst; the shutter may
still be open for the background exposure.
Flash cancel
Autoflash with
red-eye reduction
Fill flash
Night portrait
RECORDING - BASIC OPERATION
Autoflash (No display)
1
Fill flash