Filter
Top Products
24 RECORDING - BASIC OPERATION
BASIC RECORDING OPERATION
Press the shutter-release button partway down (1) to lock
the focus and exposure.
The aperture value (f-number) and shutter speed is
displayed at the top right of the monitor when the exposure
is locked. The green viewfinder indicator lamp glows when
the focus is locked; the red lamp glows if the flash is going
to be used. If the green indicator lamp blinks, the camera
could not focus, repeat the procedure.
Press the shutter-release button all the way down (2) to
take the picture.
After the shutter releases, the green viewfinder indicator
lamp blinks and the red lamp glows while image data is
being written to the memory card. Never remove a memory
card while data is being transferred.
If the shutter-release button is pressed and held, a series of
consecutive images is captured. The previous image is
displayed between exposures. The rate of capture depends
on the image size and other functions used. The flash must
recharge between exposures. With 2816 X 1536 size
images and continuous-advance focus lock on (p. 80), the
maximum rate of capture is 0.7fps.
Place the subject within the AF area.
The focus-lock function (p. 25) can be used with off-center
subjects. If the subject is closer than 1m (3ft.) at the zoom
lens’ wide-angle position or 3m (10ft) at the telephoto
position, only use the LCD monitor to frame the subject.
2
1