Filter
Top Products
28 RECORDING – BASIC OPERATION
Press the shutter-release button all the way down to take the
picture.
• After the shutter releases, the indicator lamp next to the
viewfinder will turn orange and blink indicating image data is
being written to the memory card.
Never remove a memory card while data is being
transferred.
• The image can be previewed after it is captured by continuing to
hold down the shutter-release button. This function is disabled if
the monitor is off. Instant playback can also be used (p. 60).
Automatic Digital Subject Program Selection
Automatic Digital Subject Program Selection chooses between program AE and one
of four digital subject programs. The digital subject programs optimize camera
settings for various conditions and subjects. Automatic Digital Subject Program
Selection is only available in the digital-subject-program mode. For information on
individual subject programs, see page 35.