Filter
Top Products
61
Spot AF
The spot AF is used for selective focusing. Both focus and exposure are determined with the spot
focus area. When auto reset (p. 55) is active, the spot AF area will reset to the wide focus frame
when the camera is turned off. The spot focus area can be used with movie recording. When used
with the digital zoom (p. 59), spot focus area is enlarged.
Press and hold the center button of the controller (1) to
display the spot focus area; the center button switches
between the spot and wide AF areas.
Place the subject inside the spot focus area (2) and
pressing the shutter-release button partway down
to lock the focus and the exposure. Focus lock (p.
30) is active for off-center compositions. The focus
signals (p. 31) will confirm the image is in focus.
Press the shutter release button all the way down
to take the picture (3).
When the LCD monitor is off, the camera cannot
be switched between wide and spot AF; the last
AF mode set will be active. When the live image
only display is used, switching between the wide
and spot AF modes resets the display mode to full.
1
2
3