Filter
Top Products
Viewfinder and indicator lamps
①Parallax correction marks
The area below these marks is the effective picture range in the close-up
mode (0.2 m to 0.8 m to object).
For composing (framing) the picture more precisely, use the preview
function.
②Target/Auto-focus frame
③Green lamp
ON: Indicates that camera is ready for shooting.
Blinking: Indicates that camera fails in automatic focusing.
④Red lamp
ON: Indicates that flashlight is being charged.
Blinking: ● Low illumination warning (blinks 4 times/second).
→Use the flashlight.
● Camera shake warning (blinks twice/second).
→Use a tripod.
* If both the green and red lamps are blinking, it is impossible to take pictures.
In this case, the following causes are thinkable.
1) The CF card has no room for writing data in the selected data compression mode.
2) There is no CF card set in the camera.
3) The CF card set in the camera is differently formatted.
4) The CF card cover is open.
5) The batteries are dead or depleted.
6) There occurs an error in camera operation.
Refer to “Error message”.
①
②
③
④