Filter
Top Products
Camera Installation
12
Side Controls
7. Sound Alarm Trigger – Adjust the Trigger to set the
Sound Alarm sensitivity. The Receiver will beep to alert
the user when the sound is above a preset sound level.
Adjust the side wheel to Increase or Decrease the level.
8. Camera ON/OFF Switch – Turns the Camera ON or
OFF.
Camera Installation
Before you install the camera, carefully plan where and how it will be positioned, and where you will route
the cable that connects the camera to the power adaptor.
• Before starting permanent installation, verify its performance by observing the image on the
receiver when camera is positioned in the same location/position where it will be permanently
installed and the receiver is placed in the location where it will be used most of the time.
Installation Warnings:
• Aim the Camera(s) to best optimize the viewing area: Select a location for the camera that
provides a clear view of the area you want to monitor, which is free from dust, and is not in line-
of-sight to a strong light source or direct sunlight.
• Avoid installing the cameras where there are thick walls, or obstructions between the Cameras
and the Receiver.
Night Vision
This camera has built-in IR LEDs, which provides the camera with the ability to view images in no/low
light conditions. It is important to use the provided power adaptor (and not the Batteries) when using the
camera for prolonged periods in low light conditions, as the built-in IR LEDs will drain the battery more
quickly than regular daytime use.
7
8