Filter
Top Products
15
ENG
Low Signal / No Signal Warnings
When the Camera is positioned too far from the Receiver, warning messages will be displayed:
Adjusting the Receiver Volume
The Receiver Volume can be adjusted using the UP and
DOWN ▲▼ arrow buttons when viewing a camera.
Press the DOWN▼ Arrow to decrease the Volume, and press
the UP▲ Arrow to increase the volume. When the volume is
set to one bar (lowest setting), the volume is muted.
The Volume Adjustment icon will be displayed during Volume
changes, and will disappear after 10 seconds of inactivity.
LOW SIGNAL: The “Low Signal” signal
appears when the receiver has One or
Two bars. You will still get an image,
however updating may be less frequent.
NO SIGNAL: The “No Signal” message
means the receiver cannot access the
camera. Please reposition the camera,
or check the Camera power.