Filter
Top Products
Camera Pairing
18
Camera Pairing
The System comes with camera(s) that have already been paired. These cameras will communicate with
the receiver once powered on.
The Pairing Function assigns each Camera to a different channel on the Wireless Receiver (up to 4
Cameras), and is necessary for configuring additional cameras.
NOTE: It is highly recommended to pair the Cameras to the Receiver before permanently mounting the
Cameras.
1. Power on the Camera by connecting the Power Adaptor or Battery Pack, and turning the switch to ON.
The power LED for the Camera should be ON.
2. Power on the Receiver by connecting the power adaptor to the 9V Input on the side.
3. Press the MENU button on the Receiver. Navigate to the
PAIRING Menu option by pressing using the ▲▼◄► keys to
navigate. Press the OK button to open the Pairing Menu.
4. Select a channel by pressing the UP and DOWN ▲▼
arrows. Press the OK Button on the receiver to accept.
5. Press the PAIR button located on the bottom of the Receiver using a
pen tip or paperclip.
6. A message will be displayed on the Receiver screen.
The Receiver will count down from 10~0 – you must press the PAIR
button on the Camera during this time to successfully pair the Camera.
If the button on the Camera is not pressed, the Receiver will return to the
view screen, and no pairing will take place.