Filter
Top Products
Accessing Menu System
17
ENG
Power Saving Menu
The Power Saving Menu is used to turn off the screen at a
predetermined time, when there is no camera detected or
connected to the Receiver. This function can be set to 1
minute, 2 minutes, 5 minutes, 10 minutes, or disabled by
selecting Cancel.
Setting Menu
The Setting Menu contains 2 submenus:
1. A/V Out – Changes the quality of the image sent to the A/V
receiving device (i.e. TV or Monitor).
2. Default – Resets all menu settings to Factory Default.
NOTE: Resetting the receiver will not reset all Camera Pairing.
A/V Out Menu
The A/V Out menu option is used to adjust the Resolution
Quality of the image sent to the Viewing Device (such as a TV,
VCR or Monitor). Use the UP and DOWN ▲▼ arrows to select
a Resolution, and press OK to accept.
It is strongly recommended to use the “High” setting to ensure
the best image reproduction on large screens – the default
setting is “High”.
Setting Menu
The Setting option is used to reset the Receiver to Factory
Defaults – all menu settings will be reset. Use the UP and
DOWN ▲▼ arrows to select YES, and press OK to accept.
NOTE: Camera pairing settings will NOT be affected by a
reset. Cameras will remain paired with the Receiver.