Filter
Top Products
Accessing Menu System
16
Accessing Menu System
Press the MENU Button on the Receiver to enter MENU System. Use the ▲▼◄► Buttons to navigate
UP, Down, Left or Right in the menu, and press the OK Button to confirm a setting.
Main Menu
The Main Menu contains 4 submenus:
1. PAIRING – Use the Pairing menu to add camera(s) to the
receiver.
2. EV – Adjusts the Brightness level of the Receiver LCD
Screen.
3. POWER SAVING – Turns on the Receiver Power Save
mode (when no activity on the cameras is detected).
4. SETTING – Sets the AV Out options, and resets the
Receiver to Factory Defaults (erases all configurations).
Pairing Menu
The System comes with camera(s) that have already been
paired. The Pairing Function assigns each Camera to a
different channel on the Wireless Receiver (up to 4 Cameras),
and is necessary for configuring additional cameras.
Use the ▲◄►▼ keys to navigate. Select the desired Pairing
channel, and press the OK Button to begin the Pairing Process
with a camera.
NOTE: It is highly recommended to pair the Cameras to the
Receiver before permanently mounting the Cameras. See the
Pairing Section of this manual for details.
EV Menu
The EV Menu is used to adjust the Exposure of the Camera.
Use the LEFT and RIGHT ◄► arrows to change the bar from
DARKEST (left) to LIGHTEST (right). Press the OK Button to
accept the change.