Filter
Top Products
Troubleshooting
19
ENG
7. Press the PAIR button on the back of the Camera.
Once the camera has been paired, it will be immediately viewable on the
Receiver Monitor.
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem Solution
There is no picture from a
Camera.
• Check all connections to the Camera. Make sure
the adaptor is plugged in.
• Make sure that the Cameras and Receiver are
both ON.
• Make sure that the camera is in range of the
Receiver.
• If using the battery adaptor, try replacing the
Batteries
The picture is dropping
• Move the camera closer to the receiver.
• Try repositioning the camera, receiver or both to
improve the reception.
There are problems with
the Audio.
• Ensure that the volume on the TV is ON
• Make sure that there is sound within range of the
Camera Microphone
• If the unit emits a loud screeching noise
(feedback), move the camera or receiver farther
apart.
The Picture is or has
become Choppy
• The picture may become choppy when
experiencing a lower frame rate (i.e. 10 frames
per second vs. a higher 20 frames per second).
• Try moving the camera closer to the receiver.
• Remove obstructions between the Receiver and
Camera.
The Picture appears to be
grainy when using AV out
function to view on a large
screen TV/Monitor
• the purpose of the AV output is for convenience
only. When using with large screen TV/Monitor,
the picture might be grainy as the camera limits
video resolution to VGA (640x480 pixels). This is
not a product defect.
• For best performance use with TV/Monitor PIP
(Picture in Picture) function. Check your
TV/Monitor product manual to see if this feature is
available on your TV/Monitor
• View video on a smaller screen TV/Monitor