Filter
Top Products
66
Preparations
Preparazione
Preparación
• Turn the clamping disk
ቪ
upwards against the housing
of the flash unit and then remove the flash unit from the
camera.
A flash unit incorporated in a camera must only be
used additionally if it is completely folded out into
its working position. An incompletely folded out
camera flash can be damaged when the shutter is
tripped.
Synchronisation
Synchronisation between flash unit and camera is automa-
tically established when the mecablitz is inserted in the
camera’s accessory shoe.
A synch cable (36-50 normal, or 36-52 coiled, optional
extra) can be used for synchronisation if the camera does
not have a hot shoe.
Switching the flash unit on and off
To turn on the flash unit, push the main switch to „ON“ (fig.
3).The green lamp lights up to indicate flash readiness.
☞
fig.3
Fig. 3
Fig. 3
798 47 0151-A1 DocuPart 27.05.2008 16:02 Uhr Seite 66