Filter
Top Products
92
be switched off on the „master“ or camera
(refer to the respective operating instructions).
SLAVE flash mode with the mecablitz 34 CS-2:
•
Mount the SLAVE flash unit on the supplied stand and
turn on with the main switch
ቤ
.
•
Set the SLAVE function selector
ቮ
on the SLAVE
flash unit at 2 (fig. 10).The SLAVE indicator
ባ
will
flash (fig. 11).
• On the camera, a mecablitz (e.g. 40 MZ... or 50 MZ-5)
must be mounted which operates as controlling
„master“ in the cordless Metz remote mode.
The 34 CD-2 SLAVE can only operate with the con-
troller address 1 (see operating instructions for the
mecablitz mounted on the camera).
This mode is not possible if a 34 CS-2 is mounted as a
„master“ on the camera.
• The setting of the operating mode selector
ቧ
on the
SLAVE 34 CS-2 flash unit is insignificant.
☞
Cordless SLAVE operation
Controllo SLAVE senza cavi
Funcionamiento esclavo sin cable
Fig. 10
Fig. 10
Fig. 10
Fig. 11
Fig. 11
Fig. 11
798 47 0151-A1 DocuPart 27.05.2008 16:02 Uhr Seite 92