Filter
Top Products
Sensor Control: Color Correction
31
SMX-M8xx Series USB2.0 Camera User Guide
Color Correction
The Color Correction controls are designed to adjust the intensity of the color
properties (Brightness, Contrast and Saturation) of the image that is displayed by the
camera.
This correction is also done on the software level and does not affect any electrical
settings of the camera.
Check the Enable command to make the Color Correction controls available.
Use the Default button to restore the default values of Brightness, Contrast and
Saturation - 0,0; 1,00; 1,00, respectively (
see Figure 4-3 The SMX-M8X Camera Application
Color Correction Controls).
Figure 4-3 The SMX-M8X Camera Application Color Correction Controls
Note: Use of the Controls done on the software level (Color Balance, Color Correction, White Balance (Soft), etc)
may cause an overloading of the computer's processor, especially when more than one camera is running
Note: The Color Correction tab is disabled when running the SMX-M81M Camera (see Figure 4-4 Application’s main
window outlook when using the SMX-M81M Camera)